NEC Univerge SV8100 Features And Specifications Manual page 260

Issue 5.0
Program
Program Name
Number
20-19-01 System Options for Caller ID –
Caller ID Displaying Format (If
displaying digits are more than
12 digits)
20-19-05 System ID Options for Caller ID –
Caller ID Sender Queuing Time
(Sender Wait)
20-20-01 Message Setup for Non-Caller ID
Data – Private Call
20-20-02 Message Setup for Non-Caller ID
Data – Call from Out of Service
Area
20-20-03 Message Setup for Non-Caller ID
Data – Call Information with
Error
90-03-01 Save Data
90-04-01 Load Data
2 - 234
Description/Comments
Determine whether the first 10
digits or last 10 digits should be
displayed when Caller ID exceeds
12 digits.
With the Caller ID Sender Queuing
option, determine the time an
incoming call waits in queue for a
DSP resource to become
available. If a resource becomes
available during this time, the call
immediately rings the single line
telephone with Caller ID. If the
time expires before a resource
becomes available, the system
rings the single line telephone
without Caller ID (until the queuing
time expires, the single line
telephone does not ring). If the
queuing timer is set to 0, the
system does not queue the
incoming call.
Enter the text to be displayed for
Caller ID when a user receives a
call which is classified as a private
call.
Enter the text to be displayed for
Caller ID when a user receives a
call which is classified as an
out-of-service area call.
Enter the text to be displayed for
Caller ID when a user receives a
call which is classified as a call
with a CID error.
Save the programmed data on the
SRAM and Flash ROM to the
16MB/32MB ATA removable
Compact Flash memory card.
Also, used to save stored Caller ID
if permanently saved with service
code #*#9 (11-15-03).
Load the system data from the
inserted Compact Flash Memory
to the SRAM and Flash ROM in
the system.
Also, used to load stored Caller ID.
UNIVERGE SV8100
Assigned Data
1
0 = First 10 digits
(Upper)
1 = Last 10 digits
(Lower)
(default = 0)
0~64800 (seconds)
(default = 0)
24 Alphanumeric
Characters
(default = PRIVATE)
24 Alphanumeric
Characters
(default = OUT OF
AREA)
24 Alphanumeric
Characters
(default = NO CALLER
INFO)
Dial 1 + press Transfer
(Press Transfer to
cancel.)
Dial 1 + press Transfer
(Press Transfer to
cancel.)
Level
2 3







Caller ID