NEC Univerge SV8100 Features And Specifications Manual page 505

UNIVERGE SV8100
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
15-02-02 Multiline Telephone Basic Data
Setup – Trunk Ring Tone
15-02-03 Multiline Telephone Basic Data
Setup – Extension Ring Tone
15-02-35 Multiline Telephone Basic Data
Setup – Message Waiting Lamp
Cycle for Calling Extension
15-02-36 Multiline Telephone Basic Data
Setup – Message Waiting Lamp
Cycle for Called Extension
Distinctive Ringing, Tones and Flash Patterns
Description/Comments
From the range specified in
Program 22-03-01, select the
multiline terminal extension trunk
ring tone.
Select the extension intercom ring
tone.
Select the cycle method that the
Large LED flashes when the
extension has set Message
Waiting.
Select the cycle method that the
Large LED flashes when the
extension has Message Waiting
set to the extension.
Assigned Data
1
1 = High
2 = Medium
3 = Low
4 = Ring Tone 1
5 = Ring Tone 2
6 = Ring Tone 3
7 = Ring Tone 4
8 = Ring Tone 5
(default = 2)
1 = High
2 = Medium
3 = Low
4 = Ring Tone 1
5 = Ring Tone 2
6 = Ring Tone 3
7 = Ring Tone 4
8 = Ring Tone 5
(default = 8)
1 = Cycle 1
2 = Cycle 2
3 = Cycle 3
4 = Cycle 4
5 = Cycle 5
6 = Cycle 6
7 = Cycle 7
(default = 7)
1 = Cycle 1
2 = Cycle 2
3 = Cycle 3
4 = Cycle 4
5 = Cycle 5
6 = Cycle 6
7 = Cycle 7
(default = 3)
Issue 5.0
Level
2 3




2 - 479