NEC Univerge SV8100 Features And Specifications Manual page 284

Issue 5.0
Program
Program Name
Number
22-02-01 Incoming Call Trunk Setup
22-03-01 Trunk Ring Tone Range – Ring
Tone Pattern
22-04-01 Incoming Extension Ring Group
Assignment
22-05-01 Incoming Trunk Ring Group
Assignment
22-06-01 Normal Incoming Ring Mode
2 - 258
Description/Comments
Set the feature type for the trunk
you are programming.
Assign Ring Tone Ranges to
trunks. Trunks ring extensions
according to the Ring Tone Range
selected in Program 22-03-0 and
the settings made with either
Service Code 720 or Program
15-02-02.
Assign extensions to ring groups.
To have the trunks ring
extensions, assign trunks to a
Ring Group. The incoming ring
group assignment programmed in
Program 41-03-01 overrides the
setting in this program.
Indicate whether the trunks in the
Ring Group assigned in Program
22-04-01 should ring or not ring.
UNIVERGE SV8100
Assigned Data
1
Trunks 1~200
0 = Normal
1 = VRS (second
dial tone if no
VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode
Switching
(default = 0)
0~8
(Ring Tone Pattern
1~4)
(Melody 1~ Melody 5)
(default = 0)
Maximum eight digits
Default:
Extensions 101~108
(first eight ports) ring
for incoming Ring
Group 1 calls. No
other extensions ring
for incoming Ring
Group 1 calls.
Incoming Group
Number for Day/Night
Mode (1~8):
0 (No Setting)
001~100
(Incoming Group)
102 (In-Skin/ External
Voice Mail or VM8000
InMail)
(default = 1)
0 = No Ring
1 = Ring
(default = 1)
Central Office Calls, Answering
Level
2 3




