NEC Univerge SV8100 Features And Specifications Manual page 1012

Issue 5.0
Program
Program Name
Number
11-12-32 Service Code Setup (for Service
Access) – Answer for Park Hold
11-12-35 Service Code Setup (for Service
Access) – Station Park Hold
11-16-11 Single Digit Service Code Setup
– Station Park Hold
15-02-08 Multiline Telephone Basic Data
Setup – Automatic Handsfree
15-07-01 Programmable Function Keys
15-18-01 Virtual Extension Key Enhanced
Options – Virtual Extension Key
Operation Mode
15-18-02 Virtual Extension Key Enhanced
Options – Display Mode when
pacing a call on Virtual
Extension Key
20-06-01 Class of Service for Extensions
20-11-19 Class of Service Options (Hold/
Transfer Service) – Hold/
Extended Park
2 - 986
Description/Comments
Set the service code used for
answering a call in Park.
Set the service code used for
placing a call in a Personal Park.
Customize the one-digit service
code used when placing a call in
Personal Park.
Set whether pressing a One-
Touch key preselects the key or
goes off-hook to access the key.
Assign a keys as a Park Orbit key
(code 04 plus Park orbit number
[01~64]) or as a Personal Park
key.
Set whether an incoming call to a
Virtual Extension/CAR resides on
the Virtual Extension/CAR key
once answered (1) or appears on
a CAP Key/CO Appearance Line
key (0). This setting applies to
multiline terminals, single line
telephones and virtual extension
numbers.
Define whether calls to or from a
Virtual Extension Key display the
Virtual Extension Key name or the
name of the extension on which it
resides.
Assign a Class of Service (1~15)
to extensions.
Determine whether an extension
Class of Service should allow
normal or extended Park.
UNIVERGE SV8100
Assigned Data
1
MLT, SLT
#
(default: 6)
MLT, SLT
(default = 757)
(default not assigned)
0 = Preselect
1 = One-Touch

(Automatic Handsfree)
(default = 1)
Line Key 1~48
0~99 (Normal Function
Code 751 by default)

 
00 ~ 99
(Appearance Function
Code) (Service Code
752 by default)
0 = Release
1 = Land On the Key
(default = 0)
0 = Secondary
Extension Name
1 = Actual Station
Name
(default = 0)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:

Extension port 101 =
Class 15
All other extension port
= Class 1
0 = Normal
1 = Extended
(default = 0 for COS
1~15)
Level
2 3






Park