NEC Univerge SV8100 Features And Specifications Manual page 309

Hide thumbs Also See for Univerge SV8100:
Table of Contents

Advertisement

UNIVERGE SV8100
Program
Program Name
Number
20-13-09
Class of Service Options
(Supplementary Service) –
Privacy Release
20-13-10
Class of Service Options
(Supplementary Service) –
Barge-In Monitor
20-13-11
Class of Service Options
(Supplementary Service) – Room
Monitor, Initiating Extension
20-13-12
Class of Service Options
(Supplementary Service) – Room
Monitor, Extension Being
Monitored
20-13-13
Class of Service Options
(Supplementary Service) –
Continued Dialing (DTMF) Signal
on ICM Call
20-13-14
Class of Service Options
(Supplementary Service) –
Department Calling (PLT No
Called Extension)
20-13-15
Class of Service Options
(Supplementary Service) –
Barge-In, Initiate
20-13-16
Class of Service Options
(Supplementary Service) –
Barge-In, Receive
20-13-17
Class of Service Options
(Supplementary Service) –
Barge-In Tone/Display (Intrusion
Tone)
20-13-18
Class of Service Options
(Supplementary Service) –
Programmable Function Key
Programming (General Level)
Class of Service
Description/Comments
Turn Off or On an extension user
ability to initiate a Voice Call
Conference.
Enables the extension Barge-In
Mode to be Speech mode or
Monitor mode (i.e., Barge-In
initiator).
Turn Off or On an extension user
ability to Room Monitor other
extensions.
Turn Off or On an extension user
ability to be monitored by other
extensions.
Turn Off or On the extension
ability to use Continued Dialing,
which allows DTMF signal sending
while talking on extension.
Turn Off or On an extension user
ability to call a Department Group
Pilot.
Turn Off or On an extension user
ability to barge-in on other's calls.
Turn Off or On Barge-In at the
receiving extension (i.e., Barge-In
receive).
Turn Off or On the Barge-In
(Intrusion) Tone. If disabled, this
also turns off the Barge-In display
at the called extension.
Turn Off or On an extension user
ability to program General function
keys using Service Code 751 (by
default). (Refer to Program
20-07-10 for Service Code 752.)
Assigned Data
1
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Speech
1 = Monitor
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
Issue 5.0
Level
2
3
2 - 283

Advertisement

Table of Contents
loading

Table of Contents