NEC Univerge SV8100 Features And Specifications Manual page 709

UNIVERGE SV8100
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
11-11-13 Service Code Setup (for Setup/
Entry Operation) – Display
Language Selection for Multiline
Terminal
15-02-01 Multiline Telephone Basic Data
Setup – Display Language
Selection
20-06-01 Class of Service for Extensions
20-08-01 Class of Service Options
(Outgoing Call Service) –
Intercom Calls
Intercom
Description/Comments
Select the service code used at an
extension to change the displayed
language on a multiline terminal
display.
Select the language to be
displayed on a multiline terminal
display.
(To select options 8~10, press
either 8 or Recall, then press line
keys 1~3. Key 1 is option 8, Key 2
is option 9, and Key 3 is option
10.)
Assign Class of Service (1~15) for
extensions.
Turn Off or On Intercom calling for
the extension.
Assigned Data
1
MLT
(default = 678)
0 = Japanese
1 = English
2 = German
3 = French
4 = Italian
5 = Spanish
6 = Dutch
7 = Portuguese
8 = Norwegian
9 = Danish
10 = Swedish
11 = Turkish
12 = Latin American
Spanish
13 = Romanian
14 = Polish
(default = 1)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:

Extension port 101 =
Class 15
All other extension port
= Class 1
0 = Off
1 = On
(default = 1 for
COS 1~15)
Issue 5.0
Level
2 3



2 - 683