NEC Univerge SV8100 Features And Specifications Manual page 819

Hide thumbs Also See for Univerge SV8100:

Table of Contents

UNIVERGE SV8100

Comm Analyst Migration from IPK II CES – This licenses the migration of the IPKII CES to Communication

Comm Analyst Additional 256 Stations – This licenses the Communications Analyst to upgrade from 256

stations to 512 stations to report.

ACD MIS Basic – This licenses the SV8100 ACD MIS.

ACD MIS Add Monitor – This licenses the SV8100 ACD MIS for Monitor/Report.

ACD MIS Agent – This licenses the SV8100 ACD MIS for Agent Client.

60 Day Free License

The 60 Day Free License comes with the CD-CP00-US. It allows for all the features to be active for 60

days. The count down starts on the first power on and ends at midnight of the 60th day.

By default, the 60 Day Free License is set to disabled (Version 3000 and higher). The 60 day

count down starts when the system is initially powered on and continues if the 60 Day Free License

is disabled or enabled.

The CD-CP00-US works for 1440 hours from the first time powered on.

The clock counts down only when the power supply in the chassis is ON – battery is not in effect.

If the CD-CP00-US is removed, or the system is powered OFF, the countdown stops.

Every time the clock is changed, the CD-CP00-US free license (60 days) loses one hour.

While the free license is active the user can increase the port size of the system to maximum by

using Program 90-55.

Recovery License

The recovery license turns on all licenses for up to 30 days.

To request a recovery license, go to

portal and select the customer and the location of the CD-CP00-US. This can be done only once per

This can be used only once for each UNIVERGE SV8100 CD-CP00-US.

When the recovery license is generated, it gives the date that the license ends (30 days

includes the day generated).

If the date is changed in Program 10-01-XX, while the license is in effect, to a date before

the generated date it subtracts one day from the recovery license.

If the date is changed in Program 10-01-XX, while the license is in effect, to a date after the

generated date, it runs until the End Date specified when the License was generated.

http://eip.necunified.com/Default.aspx

and then go to the license