NEC Univerge SV8100 Features And Specifications Manual page 622

Issue 5.0
Program
Program Name
Number
11-12-34 Service Code Setup (for Service
Access) – Answer for Group
Hold
11-12-35 Service Code Setup (for Service
Access) – Station Park Hold
11-12-36 Service Code Setup (for Service
Access) – Door Box Access
11-12-37 Service Code Setup (for Service
Access) – Common Canceling
Service Code
11-12-38 Service Code Setup (for Service
Access) – General Purpose
Indication
11-12-40 Service Code Setup (for Service
Access) – Station Speed Dialing
11-12-41 Service Code Setup (for Service
Access) – Voice Over
11-12-42 Service Code Setup (for Service
Access) – Flash on Trunk lines
11-12-43 Service Code Setup (for Service
Access) – Answer No-Ring Line
(Universal Answer)
11-12-44 Service Code Setup (for Service
Access) – Callback Test for SLT
11-12-45 Service Code Setup (for Service
Access) – Enabled On Hook
When Holding (SLT)
11-12-46 Service Code Setup (for Service
Access) – Answer On Hook
When Holding (SLT)
11-12-47 Service Code Setup (for Service
Access) – Call Waiting Answer/
Split Answer
11-12-48 Service Code Setup (for Service
Access) – Account Code
11-12-50 Service Code Setup (for Service
Access) – General Purpose
Relay
2 - 596
Description/Comments
If required, redefine the service
code used to answer a specific
trunk which is either ringing or on
hold.
Set the service code used for
placing a call in a Personal Park.
If the service code for Doorphone
Access is not acceptable, change
it here.
Customize the Service Codes
used for common canceling
service code access.
Customize the Service Codes
used for general purpose
indication access.
Customize the station speed
access Service Codes.
The service code used for the
Voice Over feature.
Customize the Service Codes
used for flash on trunk lines.
Customize the service code used
to manually answer a Universal
Night Answer.
If required, redefine the service
code used for single line
telephone Callback Test.
Customize the Service Codes
used for the enabled on hook
when holding (single line
telephone).
Customize the Service Codes
used for the answer on hook when
holding (single line telephone).
If required, use this program to
change the code users dial to Split
while on a call.
Use to customize the Service
Codes used for the account code.
Define the service code used for
turning the general purpose relay
on and off.
UNIVERGE SV8100
Assigned Data
1
MLT, SLT
(default = 762)
MLT, SLT
(default = 757)
MLT, SLT
(default = 702)
MLT, SLT
(default = 620)
MLT
(default = 783)
MLT, SLT
#
(default = 7)
MLT
(default = 690)
SLT
#
(default = 3)
MLT, SLT
#
(default = 0)
SLT
(default = 799)
SLT
(default = 749)
SLT
(default = 759)
SLT
(default = 794)
SLT
# #
(default = )
MLT, SLT
(default = 780)
Flexible System Numbering
Level
2 3














