NEC Univerge SV8100 Features And Specifications Manual page 148

Issue 5.0
Program
Program Name
Number
44-05-10 ARS/F-Route – CCIS over IP
Destination Point Code
44-05-11 ARS/F-Route – Network
Specified Parameter Table
44-06-01 Additional Dial Table
44-07-01 Gain Table for ARS/F-Route
Access – Incoming Transmit
44-07-02 Gain Table for ARS/F-Route
Access – Incoming Receive
44-07-03 Gain Table for ARS/F-Route
Access – Outgoing Transmit
44-07-04 Gain Table for ARS/F-Route
Access – Outgoing Receive
44-08-01 Time Schedule for ARS/F-Route
2 - 122
Description/Comments
For each ARS/F-Route table
(1~500). Set the CCIS over IP
Destination Point Code (0~16367).
For each ARS/F-Route table
(1~500) assign the priority (1~4).
Assign the Network Specified
Parameter Table (0~16).
If an Additional Dial Number Table
is entered in Program 44-05-03,
define the additional dial table
(1~1000) to add digits in front of
the dialed ARS/F-Route number
#
(24 digits max: 1-9, 0  , Pause).
To enter a wild card/don't care
digit, press Line Key 1 to enter a P
(pause) symbol.
Set the gain table to be used
(1~500). If an extension dials
ARS/F-Route number:
The Extension Dial Gain Table is
activated, which is assigned in
Program 44-05.
The Extension Dial Gain Table
follows Outgoing transmit and
Outgoing receive settings.
If the incoming call is transferred
to another line using ARS/
F-Route:
The Tandem Gain Table is
activated, which is assigned in
Program 44-05.
The Tandem Gain Table follows
the Incoming transmit and
Incoming receive settings for
incoming line, and Outgoing
transmit and Outgoing receive
settings for the outgoing line.
For ARS/F-Route calls, the
CODEC gains defined in Program
14-01-02 and Program 14-01-03
are not activated.
Define the daily pattern of the
ARS/F-Route feature. ARS/
F-Route has 10 time patterns.
These patterns are used in
Program 44-09 and Program
44-10. The daily pattern consists
of 20 time settings.
UNIVERGE SV8100
Assigned Data
1
0~16367

(default = 0)
0~16
(default = 0) 
Up to 24 digits
Enter: 1~9, 0, , #,
Pause (press line key 1
to enter a pause)
(default not assigned)
1~63
(-15.5 ~ +15.5dB)
(default = 32 [0dB])
1~63
(-15.5 ~ +15.5dB)
(default = 32 [0dB])
1~63
(-15.5 ~ +15.5dB)
(default = 32 [0dB])
1~63
(-15.5 ~ +15.5dB)
(default = 32 [0dB])
Time Number: 01~20
Start Time =
0000~2359
End Time =
0000~2359
Mode: 1~8
Default = All Schedule
Patterns: 0:00 – 0:00,
Mode 1
Automatic Route Selection
Level
2 3





