NEC Univerge SV8100 Features And Specifications Manual page 258

Issue 5.0
Program
Program Name
Number
14-01-20 Basic Trunk Data Setup – Block
Outgoing Caller ID
14-01-21 Basic Trunk Data Setup – Caller
ID Block Code
14-01-22 Basic Trunk Data Setup – Caller
ID to Voice Mail
14-02-10 Analog Trunk Data Setup –
Caller ID
15-02-08 Multiline Telephone Basic Data
Setup – Automatic Handsfree
15-02-40 Multiline Telephone Basic Data
Setup – Additional Dial for Caller
ID Call Return
15-03-09 Single Line Telephone Basic
Data Setup – Caller ID Function –
For External Module
15-03-10 Single Line Telephone Basic
Data Setup – Caller ID Name
15-03-11 Single Line Telephone Basic
Data Setup – Caller ID Type
2 - 232
Description/Comments
Enable/Disable the system from
automatically blocking outgoing
Caller ID information when a user
places a call.If allowed (i.e. block,
enabled), the system
automatically inserts the Caller ID
block code (defined in 14-01-21)
before the user dialed digits.
If prevented (i.e., block disabled),
the system outdials the call just as
it was dialed by the user.
Enter the code, up to eight digits,
that should be used as the Caller
ID Block Code. This code is
automatically inserted before
dialed digits if Program 14-01-20
is set to '1'.
Enable/Disable the system ability
to send the Caller ID digits to voice
mail.
Enable (1) or Disable (0) a trunk to
receive Caller ID information.
Set whether pressing a key
accesses a One-Touch Key (1) or
preselects the key (0).
Enter the digits to be dialed in front
of the Caller ID when using Caller
ID Call Return.
Enable/Disable the Caller ID FSK
signal for an external Caller ID
module or a 3rd-Party vendor
telephone with Caller ID display.
If voice mail is used, this setting
must be disabled or the system
integration codes for disconnect
are incorrect. For Caller ID Sender
Queuing, set this option to "1".
Determine whether or not a single
line telephone should display the
Caller ID name.
Determine whether the Caller ID
type is FSK or DTMF.
UNIVERGE SV8100
Assigned Data
1
Trunks 1~200
0 = Disable
1 = Enable
(default = 0)
Trunks 1~200
Dial (up to eight digits)
67
Trunks 1~200
0 = Disable
1 = Enable
(default = 0)
Trunks 1~200
0 = No

1 = Yes
(default = 0)
0 = Preselect
1 = One-Touch
(Automatic Handsfree)
(default = 1)
Up to four digits
#
(0, 1~9, , )
(default not assigned)
0 = Disable
1 = Enable
(default = 0)
0 = Disable
1 = Enable
(default = 1)
0 = FSK
1 = DTMF
(default = 0)
Level
2 3







Caller ID