NEC Univerge SV8100 Features And Specifications Manual page 739

UNIVERGE SV8100
VoIP ToS Setup:
The UNIVERGE SV8100 supports Quality of Service (QoS) Marking for the Session Initiation Protocol
(SIP).
Program
Program Name
Number
84-10-01 ToS Setup – ToS Mode
IP Extension Numbering:
Program
Program Name
Number
11-02-01 Extension Numbering
SIP Extension Codec Information:
Program
Program Name
Number
84-19-01 SIP Extension CODEC
Information Basic Setup –
Number of G.711 Audio Frames
84-19-02 SIP Extension CODEC
Information Basic Setup – G.711
Voice Activity Detection Mode
84-19-03 SIP Extension CODEC
Information Basic Setup – G.711
Type
IP Single Line Telephone (SIP)
Description/Comments
When Input Data is set to 1,
Protocol 7 is invalid. When Data is
set to 2, Protocols 2~6 are invalid.
Description/Comments
Define the IP Phone extension
number.
This designated extension is

used to register your IP
Phone and is programmed IP
Phone programming. Refer
to the Installation Instructions
for Elite ITH-4D/8D/16D-2/3
term
D IPK Terminals and the
IP-R (IPK) Adapters.
Description/Comments
Define the G.71 audio frame size.
Enable/ Disable Voice Activity
Detection for G.711.

Define the G.711 Type – -law is
recommended when in USA.
Assigned Data
1
0 = Disable (Invalid)
1 = IP Precedence
2 = Diffserv
(default = 0)
Assigned Data
1
Up to eight digits
1 101
2 102
3 103
~ ~

99 199
100 3101
~ ~
512 3513
Assigned Data
1
1~4
1 = 10ms
2 = 20ms
3 = 30ms
4 = 40ms
(default = 2)
0 = Disable
1 = Enable
(default = 0)
0 = A-law
1 =-law
(default = 1)
Issue 5.0
Level
2 3

Level
2 3
Level
2 3



2 - 713