NEC Univerge SV8100 Features And Specifications Manual page 916

Issue 5.0
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
11-02-01 Extension Numbering
11-10 Service Code Setup (for System
Administrator)
11-11 Service Code Setup (for Setup/
Entry Operation)
11-12 Service Code Setup (for Service
Access)
11-13 Service Code Setup (for ACD)
2 - 890
Description/Comments
The Mobile Extension port must
be an unequipped extension port
on the SV8100 system. This
extension port is directed to an
Abbreviated Dial bin.
Customize the System
Administrator service codes.
Customize the service code for
Setup and Entry.
Customize the service codes for
Service Access.
Customize the service codes for
ACD.
UNIVERGE SV8100
Assigned Data
1
Up to eight digits
1 101
2 102
3 103

~ ~
99 199
100 3101
~ ~
512 3513
Please refer to the
SV8100 Programming
Manual for more
information on this
program.
Please refer to the
SV8100 Programming
Manual for more
information on this
program.
Please refer to the
SV8100 Programming
Manual for more
information on this
program.
Please refer to the
SV8100 Programming
Manual for more
information on this
program.
Mobile Extension
Level
2 3



