NEC Univerge SV8100 Features And Specifications Manual page 1030

Issue 5.0
PCPro converts an Electra Elite IPK II PCPro database file into a SV8100 PCPro database

file. PCPro Software Version 3.00 or higher is required.
The system data to be converted is limited to the system data listed below.
2 - 1004
PRG No.
10-23 IP System Interconnection Setup
11-01 System Numbering
11-02 Extension Numbering
13-04 Abbreviated Dial Number and Name
14-01 Trunk Basic Data Setup
14-02 Analogue Trunk Data Setup
14-05 Trunk Group
14-06 Trunk Group Routing
15-01 Extension Basic Data Setup
15-07 Programmable Function Key
21-02 Trunk Group Routing for Extensions
22-02 Incoming Service Type Setup
22-04 Incoming Ring Group Setup
22-05 IRG Assignment for Normal Ring Trunk
22-07 DIL Assignment
22-11 Dial-In Conversion Table Data Setup
26-01 Automatic Route Selection Service
26-02 Dial analysis Table for ARS/LCR
26-03 ARS Dial Treatments
26-04 ARS Class of Service
26-11 Transit Network ID Table
26-12 Network Specified Parameter Table for ARS/F-Route
40-02 Mail Box Setup
44-02 Dial analysis Table for F-Route Access
44-05 F-Route Table
44-06 Additional Dial Table
Name
UNIVERGE SV8100
PC Programming