NEC Univerge SV8100 Features And Specifications Manual page 801

UNIVERGE SV8100
In 15-01-04, enter 0
In 10-03-05 enter 0
In 20-09-03, enter 0 to
disable sub-address
display by telco.
In 14-01-07, enter 0
to prevent outgoing
calls.
In 14-01-10, enter 0.
ISDN Compatibility
Should Caller ID be included
No
in the call's setup message?
Should telco display the
No calling number's sub-
In 21-12-01, program the calling party
number data (15 digits max.) for each
In 21-13-01, program the calling party
number data (15 digits max.) for each
Are outgoing
No calls allowed on
specific trunks?
In 14-05-01 assign PRI trunks to trunk groups
(This determines available channels for PRI trunks).
In the default program,
Do you need to restrict
extensions have full
certain extensions from
access to all trunks.
placing calls on certain
Should caller hear DTMF
No confirmation tones as they
are dialing a trunk call?
If a user preselects a line, how
long should the system
remember the preselection?
If the system detects the called party is
busy, how long should the busy
tone be heard? (0-64800)
A
Yes
Yes
address?
trunk.
extension.
Yes
Build an outgoing restriction matrix.
Yes
trunks?
No
YEs
Yes
Yes
No
Go To
B
In 15-01-04, enter 1
In 10-03-05 enter 1.
In 20-09-03, enter 1 to
enable sub-address
display by telco.
In 20-06-01, assign
Class of Service to
extensions.
In 14-01-07, enter 1 to
allow outgoing calls.
In 14-07-01 for
each Access Map,
select the access
options
for each trunk.
In 15-06-01,
assign extensions
to Access Maps.
In 14-01-10, enter 1.
In 20-02-06, enter
the preselection
interval.
Issue 5.0
2 - 775