Table 2-6 Caller Id Matching Rule - NEC Univerge SV8100 Features And Specifications Manual

Hide thumbs Also See for Univerge SV8100:

Table of Contents

UNIVERGE SV8100

This feature does not work with incoming trunk calls via networking (from another system).

In this case, the refuse/routing program must be programmed in the system that has those

trunks. Routing to the other system's extension is available.

When Program 13-04 is used; it will override the setting in Program 22-02-01: Incoming

Call Trunk Setup.

Program 13-04 will follow Common or Group Speed Dial numbers.

Caller ID Matching Rule:

The system compares the Caller ID and programmed Speed Dial with these rules below.

The Speed Dial table is searched from the starting number and the first match result is used.

Default Setting

Not Installed

System Availability

All Terminals

Required Component(s)

SV8100 main software Version 3000 or higher

Caller ID – Flexible Ringing

Table 2-6 Caller ID Matching Rule