NEC Univerge SV8100 Features And Specifications Manual page 1028

Issue 5.0
The hardware/software requirements for the host PC running the PCPro application are:

CPU
Memory
Operating System (OS)
Other
Communication Port
Disk Space
TCP Port
Screen Resolution
The hardware/software requirements for the host PC running WebPro are:

Browser
Network
Screen Resolution
You can have a maximum of four users logged into WebPro anytime.

You can have up to two phones in programming mode anytime.

You can have four WebPro users and two phone programming users logged in at the same

time for a total of six users in programming mode simultaneously. However, the two
phone programming users do not show up in session management in WebPro.
2 - 1002
Item
Pentium
Pentium 4 2.5GHz (recommended)
128MB of RAM, 256MB (recommended)
MS Windows 2000
Windows XP or Microsoft Vista
Microsoft Internet Explorer 6.0 or higher
LAN, or Modem
35MB for PCPro (minimum)
TCP port 8000 must be open between the
terminal and the host PC for uploading/
downloading via LAN. PCPro/WebPro TCP port is
set for 8000 at default, but can be changed via
WebPro using Program 90-38-02. Program
90-38-02 is not accessible from Phone
Programming or PCPro. TCP port 5963 is
required to be open if the Debug Terminal is going
to be used.
800 x 600 (minimum)
1024 x 760 (recommended)
Item
MS Internet Explorer 6.0 (or higher)
Mozilla
IP connection to the KTS
800 x 600 (minimum)
1024 x 760 (recommended)
Requirement
®
III 598MHz (minimum)
Requirement
® ®
Firefox 1.0.3 (or higher)
UNIVERGE SV8100
PC Programming