NEC Univerge SV8100 Features And Specifications Manual page 288

Hide thumbs Also See for Univerge SV8100:

Table of Contents

With Automatic Handsfree, an extension user can press a line key to place a trunk call

without lifting the handset or pressing Speaker. Users without Automatic Handsfree can

preselect a line key before lifting the handset or pressing Speaker.

Long Conversation Cutoff can disconnect incoming and outgoing CO calls after a set time.

Using the Warning Tone for Long Conversation feature allows users on outgoing calls to

hear a warning tone prior to the call disconnecting.

An extension Toll Class of Service may prevent dialing certain numbers.

Dialing 9 or any other trunk access code after dialing an extension, terminates the intercom

call and seizes a trunk.

Phones that have an APR/APA installed do not pass voice to a trunk until the interdigit time

expires (Program 21-01-03).

Setting Program 14-02-11 to On may cause a slight delay in dial tone while loop current is

When Account Codes are enabled, the user must press the

character is passed to the telco. The system recognizes the initial

Account Code entry, the second

be passed to telco.

To adjust for proper audio quality, refer to Programs 81-07 and 81-17.

Default Setting

System Availability

All multiline terminals

Required Component(s)

Any Trunk Blade (i.e., CD-4COTB, CD-2BRIA, CD-PRTA, etc.)

Related Features

Alphanumeric Display

as the end of an Account Code entry, and the third

UNIVERGE SV8100

three times before the

as the beginning of an

Central Office Calls, Placing