NEC Univerge SV8100 Features And Specifications Manual page 563

UNIVERGE SV8100
Program
Program Name
Number
20-11-18 Class of Service Options (Hold/
Transfer Service) – No Recall
20-11-19 Class of Service Options (Hold/
Transfer Service) – Hold/
Extended Park
20-11-20 Class of Service Options (Hold/
Transfer Service) – No Callback
20-11-21 Class of Service Options (Hold/
Transfer Service) – Restriction
for Tandem Trunking on Hang
Up
20-11-22 Class of Service Options (Hold/
Transfer Service) – Restricted
Unsupervised Conference
20-11-23 Class of Service Options (Hold/
Transfer Service) – CAR/VE Call
Forward Set/Cancel
20-11-24 Class of Service Options (Hold/
Transfer Service) – Trunk Park
Hold Mode
20-11-25 Class of Service Options (Hold/
Transfer Service) – Transfer Park
Call
20-13-01 Class of Service Options
(Supplementary Service) – Long
Conversation Alarm
20-13-02 Class of Service Options
(Supplementary Service) – Long
Conversation Cutoff (Incoming)
term
D Cordless Lite II Terminal
Description/Comments
Allow/Deny answered Transferred
calls from recalling the originating
extension.
Determine whether an extension
Class of Service should allow
normal (0) for Program 24-01-06
or Extended (1) for Program
24-01-07).
Turn Off or On an extension ability
to receive Callbacks.
Allow/Deny an extension user
ability to set up a tandem/
conference call automatically
when they hang up.
Allow/Deny an extension user
ability to initiate a Trunk-to-Trunk
Transfer (Tandem Trunking).
Turn Off or On an extension user
ability to set and cancel Call
Forwarding for a CAR or Virtual
Extension.
Set the hold type when a trunk call
is put on hold by an extension.
Turn On or Off an extension user
ability to transfer a parked call.
Turn Off or On the Warning Tone
for Long Conversation (not for
single line telephones).
Turn Off or On an extension user
ability to use Long Conversation
Cutoff for incoming calls.
Assigned Data
1
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for COS
1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Allow
1 = Deny
(default = 0 for
COS 1~15)
0 = Allow
1 = Deny
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Non Exclusive Hold
(Off)
1 = Exclusive Hold
(On)
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
Issue 5.0
Level
2 3










2 - 537