NEC Univerge SV8100 Features And Specifications Manual page 972

Issue 5.0
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
11-12-03 Service Code Setup (for Service
Access) – Override (Off-Hook
Signaling)
11-16-04 Single Digit Service Code Setup
– Intercom Off-Hook Signaling
15-02-12 Multiline Telephone Basic Data
Setup – Off-Hook Ringing
15-07-01 Programmable Function Keys
20-06-01 Class of Service for Extensions
2 - 946
Description/Comments
Assign a service code (709 by
default) to be used for off-hook
Signaling Override.
Assign a one-digit service code to
be used for off-hook signaling.
For each extension, set off-hook
Ringing type: 0 (muted), 1 (none),
3 (beep in speaker), 4 (beep in
handset), 5 (Speaker & Handset
Beep). DID, DNIS and DIL trunks
can use any of the options –
normal/ring group trunks can use
only option 0 or 1.
Assign a function key for off-hook
Signaling (code 33).
Assign a Class of Service (1~15)
to an extension.
UNIVERGE SV8100
Assigned Data
1
MLT, SLT
(default = 709)
(default = )
0 = Muted Off-Hook
Ringing
1 = No Off-Hook
Ringing
2 = Not Used
3 = Beep in Speaker

(SP)
4 = Beep in Handset
(HS)
5 = Speaker & Handset
Beep
(default = 5)
Line Key 1~48
0~99 (Normal Function
Code 751 by default)

 
00 ~ 99
(Appearance Function
Code) (Service Code
752 by default)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:

Extension port 101 =
Class 15
All other extension port
= Class 1
Off-Hook Signaling
Level
2 3

