NEC Univerge SV8100 Features And Specifications Manual page 420

Issue 5.0
Program
Program Name
Number
22-02-01 Incoming Call Trunk Setup –
Incoming Type
22-07-01 DIL Assignment
24-02-05 System Options for Transfer –
Message Wait Ring Interval Time
24-02-08 System Options for Transfer –
Delayed Transfer Timer for All
Department Groups
24-05-01 Department Group Transfer
Target Setup
Operation
To call a department group:
1. Go off-hook.
2. Dial department extension number.
The system routes the call to the first free telephone in the department group.

3. Optional: To manually ring all members of the group, dial the single digit service code assigned for
All Member Ring (Program 11-16-10).
2 - 394
Description/Comments
If you want a trunk to be a DIL to a
Department Group, assign Service
Type 4 for each Night Service
Mode. Refer to Program 22-07-01.
For each trunk assigned Service
Type 4 in Program 22-02-01
above, assign the DIL destination
as the Department Group pilot
number (as assigned in Program
11-07-01).
For Single Line Telephones
(SLTs) without message waiting
lamps, this is the time between
intermittent ringing. If this value is
set to 0, the system rings once.
Determine the time a call should
ring a Department Group before
transferring the call.
Assign the Speed Dial bin to each
Department Group to hold the
destination for the immediate
automatic transfer of ICM and
transferred calls to the Department
Group feature.
UNIVERGE SV8100
Assigned Data
1
0 = Normal
1 = VRS (second dial
tone if no VRS
installed)
2 = DISA
3 = DID
4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode
Switching
(default = 0)
Extension Number
(maximum eight digits)
(default not assigned)
0~64800 (seconds)
(default = 30)
0~64800 (seconds)
(default = 10)
0~1999
(default = 1999)
Department Calling
Level
2 3




