NEC Univerge SV8100 Features And Specifications Manual page 298

Issue 5.0
System Availability
Terminals
All Stations
Required Component(s)
None
Related Features
Night Service
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
11-11-24 Service Code Setup (for Setup/
Entry Operation) – Change
Station Class of Service
20-06-01 Class of Service for Extensions
2 - 272
Description/Comments
If required, change the Service
Code a user dials to change an
extension Class of Service.
Assign a Class of Service (1~15)
to extensions.
UNIVERGE SV8100
Assigned Data
1
MLT
(default = 677)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:

Extension port 101 =
Class 15
All other extension port
= Class 1
Class of Service
Level
2 3
