NEC Univerge SV8100 Features And Specifications Manual page 1087

UNIVERGE SV8100
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
15-07-01 Programmable Function Keys
20-06-01 Class of Service for Extensions
20-13-06 Class of Service Options
(Supplementary Service) –
Automatic Off-Hook Signaling
(Automatic Override)
Operation
When on a call:
To place a Reverse Voice Over call:
1. Press your Reverse Voice Over key (Program 15-07 or SC 751: 47 + destination extension).
Your Reverse Voice Over key lights steadily (red) and you can talk with the programmed Reverse Voice Over

destination.
Reverse Voice Over
Description/Comments
Assign a function key for Reverse
Voice Over (code 47 + destination
extension).
Assign a function key for Voice
Over to the destination extension
(code 48). This allows the user at
the destination to switch between
calls if they were busy when the
Reverse Voice Over was initiated.
Assign a Class of Service (COS)
to each extension (1~15).
Allow a busy extension to
Manually (0) or Automatically (1)
receive off-hook signals.
Assigned Data
1
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
 
00 ~ 99

(Appearance Function
Code) (Service Code
752 by default)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
0 = Off
1 = On
(default = 1 for
COS 1~15)
Issue 5.0
Level
2 3


2 - 1061