NEC Univerge SV8100 Features And Specifications Manual page 998

Issue 5.0
Program
Program Name
Number
10-21-04 CD-CP00-US Hardware Setup –
External Source I/O Selection on
CD-CP00-US
11-12-50 Service Code Setup (For Service
Access) – General Purpose
Relay
15-07-01 Programmable Function Keys
20-06-01 Class of Service for Extensions
20-13-29 Class of Service Options
(Supplementary Service) –
Paging Display
31-01-02 System Options for Internal/
External Paging – Page
Announcement Duration
31-03-01 Internal Paging Group Settings –
Internal Paging Group Name
2 - 972
Description/Comments
Define how the I/O ports on the
CD-CP00-US are used.
Specify the service code used to
toggle the relay open and closed.
Assign function keys for External
Paging zones (19 + zone) and
External All Call Page (20). If
required, define a function key for
a multiline terminal to use the
general purpose relay (51).
Assign a Class of Service (1~15)
to an extension.
Turn Off or On an extension user
ability to display paging
information.
Set the maximum allowable
duration for a Paging
announcement.
Assign name to Internal Paging
Groups (i.e., Page Zones). The
system shows the name you
program on the telephone display.
UNIVERGE SV8100
Assigned Data
1
0 = External MOH
(CN8)/ External
Speaker(CN9)
1 = BGM source
(CN8)/ External
Speaker(CN9)
2 = External MOH
(CN8)/BGM source
(CN9)
Relations

between CN
number and
Relay number are
as follows:
CN8 = Relay2
CN9 = Relay1
(default = 1)
MLT, SLT
(default = 780)
Line Key 1~48
0~99 (Normal Function
Code 751 by default)

 
00 ~ 99
(Appearance Function
Code) (Service Code
752 by default)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:

Extension port 101 =
Class 15
All other extension port
= Class 1
0 = Off
1 = On
(default = 1 for
COS 1~15)
0~64800 (seconds)
(default = 1200)
Up to 12 characters
Refer to Programming
Manual for table.
Paging, External
Level
2 3




