NEC Univerge SV8100 Features And Specifications Manual page 810

Hide thumbs Also See for Univerge SV8100:

Table of Contents

Trunk queuing is prohibited on a K-CCIS trunk route.

Routing an incoming DID call directly across a K-CCIS link (Direct Inward Dialing

is supported only when a Closed Numbering Plan using F-Routes is used.

This feature is not supported by the CD-4ODTA Analog Line interface.

Up to four CD-CCTA blades can be assigned per system.

Extension numbers cannot start with 0 or 9.

Internal Calls, transferred calls, and K-CCIS calls do not provide Caller ID to single line

Caller ID Call Return feature is not supported with K-CCIS calls.

Call Park Searching is supported only in the local system.

When the system searches the Dial Extension Analyze Table (Program 11-20-01), it uses

prefix searching, giving the lower table number the higher priority. For example, the user

programs 211 in table 1 and 2113 in table 2, then dials 2113, the system selects table 1.

When using ARS Class of Service Matching, CCIS calls always follow Class of Service 1.

UCB is not supported for Centralized Voice Mail.

When using K-CCIS – T1 in a Netlink system, the CCTA blade is only supported in the

primary system.

Default Setting

Not installed

System Availability

All Stations

Required Component(s)

UNIVERGE SV8100