NEC Univerge SV8100 Features And Specifications Manual page 1019

UNIVERGE SV8100
Central Office Calls, Answering
Central Office Calls, Placing
Code Restriction
Direct Inward Line (DIL)
Direct Inward System Access (DISA)
Flash
Pulse to Tone Conversion
Ring Groups
Speed Dial – System/Group/Station
Trunk Group Routing
Trunk Groups
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
14-01-01 Basic Trunk Data Setup – Trunk
Name
PBX Compatibility
Description/Comments
Set the names for trunks. The
trunk name displays on a multiline
terminal for incoming and outgoing
calls.
Assigned Data
1
Up to 12 Characters
Line 001
Line 002

Line 003
:
Line 200
Issue 5.0
Level
2 3
2 - 993