NEC Univerge SV8100 Features And Specifications Manual page 917

UNIVERGE SV8100
Program
Program Name
Number
13-04-01 Speed Dialing Number and Name
– Speed Dialing Data
14-01-24 Basic Trunk Data Setup –
Trunk-to-Trunk Outgoing Caller
ID through Mode
15-22-01 Mobile Extension Setup – Mobile
Extension Target Setup
15-22-02 Mobile Extension Setup –
Connect Confirmation
15-22-03 Mobile Extension Setup – Trunk
Access Code
20-03-04 System Options for Single Line
Telephones – Dial Sending Start
Time for SLT or ARS
Mobile Extension
Description/Comments
For the bin number defined in
Program 15-22-01 for the Mobile
Extension, enter the external
number of the Mobile Extension.
This must exactly match the Caller
ID number of the Mobile Extension
or the user cannot access the
internal features.
Enable/Disable the ability to send
the original Caller ID through.
For each Mobile Extension
number, select the Abbreviated
Dial bin number to be associated
with it.
As the Mobile Extension can be a
GSM phone, it is necessary to be
certain a person and not, for
example, a GSM voice mail has
answered the call. This is
achieved by returning Music on
Hold/ring tone to the Mobile
Extension on answer, after which
the Mobile Extension user presses
* to connect the call.
For each Mobile Extension
number, select whether the user
needs to use DTMF confirmation
before a call is answered. Until the
* is pressed, the call is treated as
not being answered.
Select whether the Normal or
Individual Trunk access is used
when making the call to the mobile
number.
When an extension user dials a
Mobile Extension number, the
system waits this time before
dialing the number.
Assigned Data
1
#
1~9, 0, ,
Pause (Press line key
1)
Recall/Flash (Press
line key 2)

@ = Code to wait for
answer supervision in
ISDN (Press line key 3)
(maximum 24 digits)
(default not assigned)
0 = Disable (No)
1 = Enable (Yes)
(default = 0)
0~1999
(0 = No setting

1~1999 = target of
mobile extension)
(default = 0)
0 = Always
1 = On analog line
2 = Never
(default = 0)

0 = Use normal trunk
access code (Program
11-09-01)

1 = Use individual trunk
access code (Program
11-09-02)
(default = 0)
0~64800 seconds
(default = 3)
Issue 5.0
Level
2 3


2 - 891