NEC Univerge SV8100 Features And Specifications Manual page 620

Issue 5.0
Program
Program Name
Number
11-12-05 Service Code Setup (for Service
Access) – Cancel Camp-On
11-12-06 Service Code Setup (for Service
Access) – Switching of Voice
Call and Signal Call
11-12-07 Service Code Setup (for Service
Access) – Step Call
11-12-08 Service Code Setup (for Service
Access) – Barge-In
11-12-09 Service Code Setup (for Service
Access) – Change to STG
(Department Group) All Ring
11-12-10 Service Code Setup (for Service
Access) – Station Speed Dialing
11-12-11 Service Code Setup (for Service
Access) – Group Speed Dialing
11-12-12 Service Code Setup (for Service
Access) – Last Number Dial
11-12-13 Service Code Setup (for Service
Access) – Saved Number Dial
11-12-14 Service Code Setup (for Service
Access) – Trunk Group Access
11-12-15 Service Code Setup (for Service
Access) – Specified Trunk
Access
11-12-16 Service Code Setup (for Service
Access) – Trunk Access Via
Networking
11-12-17 Service Code Setup (for Service
Access) – Clear Last Number
Dialing Data
11-12-18 Service Code Setup (for Service
Access) – Clear Saved Number
Dialing Data
11-12-19 Service Code Setup (for Service
Access) – Internal Group Paging
11-12-20 Service Code Setup (for Service
Access) – External Paging
2 - 594
Description/Comments
Customize the Service Code, used
for cancelling Camp-On.
Customize the switching of voice
call and signal call used for service
access.
Customize the step call used for
service access.
Determine what the service code
should be for an internal party to
use the Barge-In feature.
Set the service code for ringing all
members of a Department Group.
Assign Service code for accessing
System Speed Dial bins.
Customize the group speed dialing
Service Codes used for service
access.
Assign a service code to use Last
Number Dial.
Customize the service code used
for dialing a saved number.
Customize the Service Codes
used for service access.
Customize the Service Codes
used for specified trunk access.
Customize the Service Codes
used for trunk access via
networking.
Assign a service code to clear the
Last Number Dial.
Define the service code for Clear
Save Number Dialing List if it is
not acceptable.
Define the service code for
accessing an internal paging
group.
External paging access code.
Service code setup.
UNIVERGE SV8100
Assigned Data
1
MLT, SLT
(default = 770)
MLT, SLT
(default = 712)
MLT, SLT
(default = 708)
MLT, SLT
(default = 710)
MLT, SLT
(default not assigned)
MLT, SLT
#
(default = 2)
MLT, SLT
#
(default = 4)
MLT, SLT
#
(default = 5)
MLT, SLT
(default = 715)
MLT, SLT
(default = 704)
MLT, SLT
#
(default = 9)
MLT, SLT
(default not assigned)
MLT, SLT
(default = 776)
MLT, SLT
(default = 785)
MLT, SLT
(default = 701)
MLT, SLT
(default = 703)
Flexible System Numbering
Level
2 3















