NEC Univerge SV8100 Features And Specifications Manual page 476

Issue 5.0
Program
Program Name
Number
25-02-01 DID/DISA VRS Message
25-03-01 VRS/DISA Transfer Ring Group
With Incorrect Dialing
25-04-01 VRS/DISA Transfer Ring Group
With No Answer/Busy
2 - 450
Description/Comments
Assign the source and VRS
message number to be used as
the Automated Attendant
Message for each trunk (001~200)
which is assigned as a VRS/DISA.
Set the operating mode of each
DISA trunk. This sets what
happens to the call when the DISA
caller dials incorrectly. The call
can either Disconnect (0), transfer
to an alternate ring group
destination, or transfer to In-Skin/
External Voice Mail, or Centralized
Voice Mail.
Set the operating mode of each
DISA trunk. This sets what
happens to the call when the DISA
caller calls a busy or unanswered
extension. The call can either
Disconnect (0), or transfer to an
alternate ring group destination,
In-Skin/External Voice Mail, or
Centralized Voice Mail.
UNIVERGE SV8100
Assigned Data
0 = No Message
1 = VRS (01~100 VRS
Message Number)
2 = ACI (01~04 ACI
Group Number)
3 = Department
Groups (01~64
Extension Group
Number)
(default = 0)
Ring Groups:
1~100
Trunk Ports:
001~200
Day/Night Mode:
1~8
0 (Disconnect)
1~100 (Incoming Ring
Group)
102 (In-Skin/External
Voice Mail or VM8000
InMail)
104 (Speed Dial table
Program 25-15-01)
Version 3000 software
or higher is required.
(default = 0)
Ring Groups:
1~100
Trunk Ports:
001~200
Day/Night Mode:
1~8
0 (Disconnect)
1~100 (Incoming Ring
Group)
102 (In-Skin/External
Voice Mail or VM8000
InMail)
104 (Speed Dial table
Program 25-15-01)
Version 3000 software
or higher is required.
(default = 0)
Direct Inward System Access (DISA)
Level
1 2 3


