NEC Univerge SV8100 Features And Specifications Manual page 960

Hide thumbs Also See for Univerge SV8100:

Table of Contents

You may also use Transfer to UNA. An extension user can transfer their call to UNA (i.e., External

Paging at night). Once transferred, the call rings the External Paging speakers like any other UNA call

and can be picked up at any extension. You can also set up Transfer to UNA through the Voice

Response System (VRS). This lets outside callers, answered by the VRS, dial a code to have their call

ring External Paging.

Automatic Night Service

The system allows or denies Automatic Night Service. If allowed, the calls route according to the service

patterns programmed. The Night Service programming is stored in the RAM memory. This means that if

the system is not using the Automatic Night Service, for a power failure in night mode, when the power is

restored, the system continues to be in night mode.

Programmable Function Key Can Toggle Night Modes

The software allows a Night Service Programmable Function Key (Program 15-07-01 or SC 751: 09 + 0)

to toggle night modes. You can determine in programming (Program 12-08-01) how many modes

through which the user toggles. Note that the additional data for the Programmable Function Key must

be set to 0 for the toggle function to work.

Almost all features are affected by Night Mode except the following:

Dial Tone Detection

External Alarm Sensors

Flexible System Numbering

Pulse to Tone conversion

Volume Control

Call Arrival (CAR) Keys and Virtual Extension keys do not support Day/Night Mode (09)

Programmable Function keys.

Universal Night Answer only works when Call is sent to a ring group.

A Separate Access Map and Ring Group programming entry is available for each Night

Service mode (modes 1~8). Also, Universal Answer allows an extension user to pick up a

Universal Night Answer (UNA) call.

Mode Keys can be assigned as required for DSS Consoles.

With Universal Night Answer, outside calls can ring External Paging Zones.

Programmable Function Keys simplify activating Night Service.

The relay circuits (5~8) are on the PGD(2)-U10 ADP are programmed and used for General

Purpose Relays.

UNIVERGE SV8100

Night Service