NEC Univerge SV8100 Features And Specifications Manual page 1024

Hide thumbs Also See for Univerge SV8100:

Table of Contents

As can be seen in

Figure 2-16 PC Programming

PCPro/WebPro.

If using PCPro, a user can connect directly, remotely using a modem or via LAN. A connection with the

system is made via the Connection Dialog in the application. (Refer to

Dialog on page

Direct connections (IPK II only) are established using the RS232 serial port (COM Port 1) on the

side of the system.

Modem (remote) connections are established via the internal CD-CP00-US modem. To access the

modem, dial a trunk that is directed to the modem access service code (DIL or DID) or dial an

extension that is redirected to the modem access service code. When connecting with a Modem, a

Dial Up Connection (PPP) must be set up in Windows Network Connections.

When uploading via a Dial Up connection, uploading card configuration (Hardware Upload) is not

IP (LAN) connections are established via the Ethernet connector on the CC-CP00-US blade.

Overview, three connection types are available to

UNIVERGE SV8100

Figure 2-17 PCPro Connection

PC Programming