Cordless Telephone Connection - NEC Univerge SV8100 Features And Specifications Manual

UNIVERGE SV8100
Description
Using an AP(R)-R/AP(A)-R Unit for DTH/DTR telephones or an APR-L for DTL telephones a cordless
telephone (2500-type) can be connected to a multiline terminal.
The CD-4LCA with PZ-4LCA Daughter Board, CD-8LCA with PZ-8LCE Daughter Board and the
SLTII(1)-U( ) ADP also support cordless telephones, but this feature refers to multiline terminal cordless
connection.
Conditions
A voice announced internal call to the multiline terminal does not ring the cordless

telephone.
Only one cordless single line telephone can be connected to an APR-L, AP(R)-R, or

AP(A)-R Unit.
When CO Prime Line is assigned to the associated multiline terminal, internal dial tone

cannot be transferred to the cordless telephone.
The cordless telephone requires a PBR circuit while dialing. When all PBR circuits are

busy, a busy tone is heard when the phone goes off-hook.
Depending on your environment, the maximum number of cordless devices used without

interference varies.
This feature works with 2500-type cordless single line telephones.

The multiline terminal user and the associated cordless telephone user cannot talk to each

other.
An APR-L, AP(A)-R or AP(R)-R Unit with hookflash enabled follows the same operating

procedures as a single line terminal connected to a CD-4LCA
CD-8LCA
or
The multiline terminal LCD displays normal information for multiline terminal when a

cordless terminal is used.
When the multiline terminal user goes off-hook before the cordless single line telephone

user, a PBR circuit is not connected for the cordless single line telephone.
The cordless telephone must be installed within 10 feet of the AP(R)-R, AP(A)-R Unit or

APR-L Unit.

Cordless Telephone Connection

Cordless Telephone Connection
PZ-8LCE
with Daughter Board
with
.
Issue 5.0
PZ-4LCA
Daughter Board
2 - 359