NEC Univerge SV8100 Features And Specifications Manual page 999

UNIVERGE SV8100
Program
Program Name
Number
31-04-01 External Paging Zone Group
31-05-01 Universal Night Answer/Ring
Over Page
31-06-01 External Speaker Control –
Broadcast Splash Tone before
Paging (Paging Start Tone)
31-06-02 External Speaker Control –
Broadcast Splash Tone after
Paging (Paging End Time)
31-06-04 External Speaker Control –
CODEC Transmit Gain Setup
31-06-05 External Speaker Control –
CODEC Receive Gain Setup
Paging, External
Description/Comments
Assign each External Paging
Speaker to an External Paging
Group (1~8) used for accessing
the zone. If zones 1~8 are not
connected to PGD(2)-U10 ADP,
set these unused zones to
External Paging Group 0.
Assign Universal Night Answer
ringing to each External Paging
zone. For each trunk port, make a
separate entry for each External
Paging Speaker.
Enable/Disable splash tone before
Paging over an external zone. If
enabled, the system broadcasts a
splash tone before the External
Paging announcement.
Assign option for each External
Paging Speaker (1~9).
Define the CODEC transmitting
gain settings for the external
speaker using an amplifier.
Select the CODEC gain types
(1~32) for each External Page
Speaker.
Assigned Data
1
External Paging
Speaker/Zones: 1~9
Speaker 1 [PGD(2)-
U10] = 1 (Group 1)
Speaker 2 [PGD(2)-
U10] = 2 (Group 2)
Speaker 3 [PGD(2)-
U10] = 3 (Group 3)
Speaker 4 [PGD(2)-
U10] = 4 (Group 4)

Speaker 5 [PGD(2)-
U10] = 5 (Group 5)
Speaker 6 [PGD(2)-
U10] = 6 (Group 6)
Speaker 7 [PGD(2)-
U10] = 7 (Group 7)
Speaker 8 [PGD(2)-
U10] = 8 (Group 8)
Speaker 9
(CD-CP00-US) = 1
(Group 1)
External Paging
Speaker/Zones: 1~9
0 = No Ringing (No)
1 = Ringing (Yes)
(default = 0)
0 = No Tone (None)
1 = Splash Tone
2 = Chime Tone
(default = 2)
0 = No Tone (None)
1 = Splash Tone
2 = Chime Tone
(default = 2)
1~63 (-15.5 ~ +15.5dB)
(default = 32)
External Paging
Speaker/Zone: 1~9
1~63 (-15.5 ~ +15.5dB)
(default = 32)
Issue 5.0
Level
2 3





2 - 973