NEC Univerge SV8100 Features And Specifications Manual page 1081

UNIVERGE SV8100
Program
Program Name
Number
20-08-07 Class of Service Options
(Outgoing Call Service) – Repeat
Redial
21-08-01 Repeat Dial Setup – Repeat
Redial Count
21-08-02 Repeat Dial Setup – Repeat
Redial Interval Time
21-08-03 Repeat Dial Setup – Repeat Dial
Calling Timer
21-08-04 Repeat Dial Setup – Time for
Send Busy Tone for ISDN Trunk
Operation
To use Repeat Redial (if the outside party you call is unavailable or busy):
1. Place a trunk call.
Listen for busy tone or ring no answer.

2. Press Feature + Redial.
- OR -
Press the Repeat Redial key (Program 15-07 or SC 751: 29).
Repeat Redial key flashes while you wait for the system to redial.

3. Press Speaker to hang up.
The system periodically redials the call.

4. Lift the handset when called party answers.
When using trunks with answer supervision the Repeat Redial feature automatically cancels.

Repeat Redial
Description/Comments
Turn Off or On an extension to use
Repeat Redial.
Set how many times Repeat
Redial automatically repeats if the
call does not go through.
Set the time between Repeat
Redial attempts.
Set the time the system waits for
the called party to answer after a
Repeat Redial. If the called party
does not answer in this time, the
system hangs up and tries again
(after the Repeat Redial Interval
Time). For unanswered calls, the
total time between retries is the
sum of Program 21-08-02 and
Program 21-08-03.
Set the time to send out Busy
Tone with an ISDN line, when
called party is busy.
Assigned Data
1
0 = Off
1 = On

(default = 1 for
COS 1~15)
0~255

(default = 3)
0~64800 (seconds)

(default = 60)
0~64800 (seconds)
(default = 30)

0~64800 (seconds)

(default = 0)
Issue 5.0
Level
2 3
2 - 1055