15.3
Access
Create new antenna
step-by-step
Manage...\Antennas
Creating a New Antenna
Refer to "15.2 Accessing Antenna Management" to access MANAGE Antennas.
The following table explains the most common settings. Refer to the stated chapter for more
information on screens.
Step
Description
1.
In MANAGE Antennas press NEW (F2).
2.
MANAGE New Antenna, General page
<Name:> A unique name for the new antenna.
<Hz Offset:> Horizontal offset of measurement reference point.
<V Offset:> Vertical offset of measurement reference point.
<L1 PhOffset:> Offset of L1 phase centre.
<L2 PhOffset:> Offset of L2 phase centre.
<Copy Additional Corrections:> Allows additional corrections to be
copied from the antenna which was highlighted when MANAGE New
Antenna was accessed.
All offsets are copied from the antenna which was highlighted when
MANAGE New Antenna was accessed.
3.
PAGE (F6) to access MANAGE New Antenna, IGS page.
4.
MANAGE New Antenna, IGS page
<IGS Name:> The International GPS Service name of the antenna.
GPS1200
Refer to
chapter
2
333