Leica GPS1200 Series Technical Reference Manual page 245

Coding
Step Description
<Code:> The name for the point, line or area code.
<Attribute n:> The attribute values for the code.
Type in a code and attribute values.
Up to eight attributes can be added. This is configured in the display mask.
• If a point code is selected then any open line/area is closed. The occupied point
is stored with the selected code idependently of any line/area.
• If a line code is selected then any open line is closed and a new line with the
selected code is created. The line ID is defined by the configured line ID
template. The occupied point is assigned to that line. The line stays open until
it is closed manually or another line code is selected.
• If an area code is selected then the behaviour is as for lines.
2. OCUPY (F1) to start the point occupation.
OR
PAGE (F6) to change to another page on this screen.
GPS1200 245