Creating A New Transformation - Leica GPS1200 Series Technical Reference Manual

Manage...\Coordinate Systems
13.5.2
Access
Create a transformation
step-by-step

Creating a New Transformation

Classic 3D transformations can be created.
Refer to "13.5.1 Accessing Transformation Management" to access MANAGE Transforma-
tions.
The following table explains the most common settings. Refer to the stated chapter for more
information on screens.
Step Description
1. In MANAGE Transformations highlight a transformation. A copy of
this transformation is taken for further configurations.
2. NEW (F2) to access MANAGE New Transformation.
3. MANAGE New Transformation, General page
<Name:> A unique name for the new transformation. The name may
be up to 16 characters long and may include spaces.
<Type:> Output field. No other transformations than Classic 3D can
be created.
Enter a name.
4. PAGE (F6) changes to the Parameters page.
5. MANAGE New Transformation, Parameters page
Enter the known values of the transformation parameters.
6. PAGE (F6) changes to the More page.
GPS1200 290
Refer to
chapter
38.1