Leica GPS1200 Series Technical Reference Manual page 253

Quick coding for points
step-by-step
Coding
The following table explains the most common settings. Refer to the stated chapter for more
information on screens.
Step Description
1. Refer to paragraph "Activate quick coding" to activate quick coding.
A screen must be active where points can be occupied. OCUPY (F1)
must be visible. For example SURVEY Survey: Job Name.
2. Type in the one, two or three digits of the quick code.
The current setting for <Digits:> in CONFIGURE Coding & Line-
work determines by how many keystrokes quick coding is executed.
ENTER to execute quick coding already after one or two keystrokes.
Available for <Digits: 2> and <Digits: 3> in CONFIGURE Coding &
Linework.
ESC clears digits from the entry.
3. What is the code type of the quick codes?
• For point codes continue with the next row.
• For free codes continue with step 5.
The point code assigned to the quick code is searched for in the job
codelist and point occupation begins.
Attribute values for attributes of type
• normal cannot be typed in. Depending on the setting for
<Attributes:> in CONFIGURE Coding & Linework, the default
or the last used attribute values are stored.
GPS1200
Refer to
chapter
19.3
253