Coding
Configure coding
Coding
Characteristic
method
Selection of the codes Shortcuts must be assigned to codes in the job
Recording of the
codes
Refer to "19.3 Coding & Linework" for information on configuring coding.
GPS1200
Description
codelist. <Quick Code: On> must be set in
CONFIGURE Coding & Linework. Typing the
shortcut searches for the assigned code. Point occu-
pation begins.
•
For thematical codes:
Together with the objects. With <Auto STOP:
Yes> and <Auto STORE: Yes>, the points and
codes are immediately stored.
•
For free codes:
Stored as time related information before or after
the points. A time stamp is stored with each free
code.
Quick codes must be created in LGO.
Characters that can be assigned to quick codes are:
•
0 to 9
•
A to Z, not case sensitive
•
a to z, not case sensitive
238