Leica GPS1200 Series Technical Reference Manual page 248

Coding
Free coding using a
codelist step-by-step
The following table explains the most common settings. Refer to the stated chapter for more
information on screens.
Step Description
1. Refer to paragraph "Access" to access FREECODE Select Free
Code.
2. FREECODE Select Free Code
All free codes from the job codelist which belong to the active code
groups are available for selection. Free codes marked with
attributes attached.
3. Highlight the desired code.
4. ATRIB (F3) to access FREECODE Enter Attributes.
5. FREECODE Enter Attributes
<Free Code:> The name of the selected code for which attribute
values are to be typed in.
<Code Desc:> The detailed description of the selected code.
If configured for the selected code, input fields for attribute values are
available. Type in the attribute values. Attribute values for attributes
of type
• normal can be typed in.
• fixed cannot be edited.
NEW-A (F2) to add a new attribute of type normal and of value type
text.
GPS1200 248
Refer to
chapter
10.6
have