Configuring Save/Restore Settings - Overland Storage NEO 200S User Manual

NEO 200s/400s User Guide
In the following figure, menus with the pound sign (#) are the only menus accessible when
the Access PIN is enabled, but entered incorrectly or before it is entered. To gain access to
all menus, disable the Access PIN or enter the correct PIN number when requested.

Configuring Save/Restore Settings

Use this menu item to restore a saved configuration or the factory default settings.
• Restore Passwords – This menu item restores the factory default RMU Admin user
access password.
• Restore All – This menu item restores all factory default settings.
• Restore Library Config – This menu item restores your saved library configuration
from a USB device. If you have more than one saved configuration file (.dbb) on your
USB device, press Select, then use the up and down keys to move between the
different files. When the correct configuration file is displayed, press Select again.
• Save Library Config – This menu item saves your library configuration to a USB
device.
NOTE: Ensure the USB device is formatted for FAT12, FAT16, or FAT32 and does not use
10400367-001 04/2012
autorun files.
©2012 Overland Storage, Inc.
Configuring Your Library – Operator Control Panel
4-25