Configuring Date And Time Settings; Configuring Logs And Traces - Overland Storage NEO 200S User Manual

NEO 200s/400s User Guide
NOTE: Admin can select User, Superuser, and Admin roles. Service can select User,
• User (if enabled)
• Superuser (if enabled)
• Admin
• Service
NOTE: Only one password can be set for each Role.
4. Enter the New Password (up to 10 alphanumeric characters).
5. In Repeat Password, enter the new password again.
6. In Support Name, enter the name of the person that will be able to offer the user
help with the library.
NOTE: Only one support person can be configured for the entire tape library. The support
7. In Support Phone, enter the phone number of the person that will be able to offer
the user help with the library.
8. In Support Email, enter the email address of the person that will be able to offer the
user help with the library.
9. Click one of the following:
• Refresh – to cancel the changes made to the screen.
• Submit – to apply the changes made to the screen.

Configuring Date and Time Settings

1. Click Configure Library > Date & Time in the left navigation pane.
2. Enter the current Time using the HH:MM:SS 24-hour format.
3. Enter the current Date using the MMDDYYYY format.
4. Click one of the following:
• Refresh – to cancel the changes made to the screen.
• Submit – to apply the changes made to the screen.

Configuring Logs and Traces

NOTE: This function is not available on the Operator Control Panel.
1. Click Configure Library > Logs & Traces in the left navigation pane.
10400367-001 04/2012
Superuser, Admin, and Service roles.
person may or may not be one of the user, superuser, or admin account holders.
©2012 Overland Storage, Inc.
Configuring Your Library – Web User Interface
4-16