Warning Events - Overland Storage NEO 200S User Manual

NEO 200s/400s User Guide
Error Code
B2
B3
B4
B5
81
88
90
91
92
93
94
95
96
97
98

Warning Events

Warning events described in this section are reported via email notification. The Attention
LED will blink when warning events for the following occur:
• Media
• Fan
• Redundant power supply
An appropriate message will be posted on the Operator Control Panel and the Web User
Interface.
Error Code Description
30 SCSI: transport element full
31 SCSI: all slots empty
32 SCSI: invalid opcode
33 SCSI: invalid element address
34 SCSI: invalid field in CDB
35 SCSI: Invalid drive specified
36 SCSI: SEND DIAGNOSTIC command:
invalid test number
37 SCSI: invalid LUN
38 SCSI: parameter list length error
10400367-001 04/2012
Description
Save/restore configuration settings: restore buffer corrupted, checksum calculation
failed
Save/restore configuration settings: data base field corrupted
Save/restore configuration settings: invalid personality
Save/restore configuration settings: invalid file
Drive wake up failed
Error accessing slot status
Accessor load not reached Cartridge Present sensor
No activity after Load command
Timeout while loading tape
No activity after load command
Timeout drive unload
Drive terminated unsuccessfully
Tape not ejected at robot unload
Slot not free at robot unload
Cartridge not seated in load phase
User Action
Refer to your host application documentation for problem
determination information.
©2012 Overland Storage, Inc.
LIBRARY
Warning Events
8-9