Configuring Email Notifications - Overland Storage NEO 200S User Manual

NEO 200s/400s User Guide
2. For Error Log Mode, select Continuous so all information for logs and traces will be
captured.
3. Trace Level and Trace Filter options can be changed by Service personnel only.
4. Click one of the following:
• Refresh – to cancel the changes made to the screen.
• Submit – to apply the changes made to the screen.

Configuring Email Notifications

NOTE: This function is not available on the Operator Control Panel.
Use this menu item to set up email notification of library errors and warnings.
1. Click Configure Library > Email Notification in the left navigation pane.
2. If you would like to be notified when an error occurs, select Notify Errors.
3. If you would like to be notified when a warning occurs, select Notify Warnings.
4. In To Email Address, enter the email address to which the information will be sent.
5. In SMTP Server Address (IPv4 or IPv6), enter the IP Address of the SMTP server
associated with the email address.
6. Enter the Domain Name for your library. This field cannot be blank when using
event notification.
NOTE: If you attempt to enter a blank value for the Domain Name, a warning message will
7. Click one of the following:
• Refresh – to cancel the changes made to the screen.
• Submit – to apply the changes made to the screen.
10400367-001 04/2012
appear. It will say If you are using Event Notification then a value is required for the
Domain Name.
©2012 Overland Storage, Inc.
Configuring Your Library – Web User Interface
4-17