Overland Storage NEO 200S User Manual page 59

NEO 200s/400s User Guide
Configuration files saved with one version of library firmware may not be compatible with
other versions of firmware. It is recommended to save a configuration file each time the
library firmware is upgraded. Restore the library using a configuration file that was saved
with the same version of firmware currently installed in the library.
CAUTION:
Restored Item
Auto Clean
Logical Libraries
Active Slots
Mail Slots (I/O Station)
Ethernet Setting
DHCP
Network IP Mode
Bar Code Label Length
Reported to Host
SNMP
Email Notifications
User Access
Admin
Library Mode
Library Name
Host Name
Logs & Traces Error Log
Mode
OCP Access PIN
SSL for Web
Drives
Power
Control Path Drive
Speed
Topology
IPv6 Stateless Autoconfig Enabled
10400367-001 04/2012
Restoring factory defaults will wipe out all the previous configuration data.
Default Setting
Disabled
1
Maximum number of slots
in library minus Mail Slots
Enabled
Auto
Enabled
IPv4 Only
8
Disabled
Disabled
secure
Random
(Blank)
Continuous
Disabled
Disabled
Power On
Drive 1 only
Auto
LN-Port
©2012 Overland Storage, Inc.
Configuring Your Library – Operator Control Panel
Comments
2U library has one Mail Slot and the 4U library
has three Mail Slots.
2U library has one Mail Slot and the 4U library
has three Mail Slots.
NOTE: DNS server addresses, if available, will
be automatically assigned. If the DHCP
server does not find any DNS server, the
DNS fields will be set to 0.0.0.0.
Restore from Operator Control Panel or Web
User Interface
(default)
(Depends on MAC Address)
If OCP Access PIN has been enabled the default
PIN is 0000 .
NOTE: The initial Factory Default setting is
disabled. If the OCP Access PIN setting
is changed, executing Restore Defaults
will not change the setting.
(All drives)
FC Drives (all)
FC Drives (all)
4-26