Default Settings - Overland Storage NEO S-Series User Manual

NEO S-Series User Guide
6.6

Default settings

Setting
Initial admin password
Host name
Domain name
IPv4
IPv6
DHCP
Mail slot configuration
Configure reserved slots
SCSI master drive
OCP contrast setting
Library Mode
Auto load
Loop
Drive power <ON/OFF>
Auto clean
SNMP
FC tape drives
Log Tracing Configuration
Email notification
Partitioning
Table 3 Default settings
10400645-001
Default for the library
adm001
Test88
TestXXX.de
Enabled
Disabled
Disabled
Disabled
Reserved slots = 0
The lowest physical drive is initially the LUN master drive.
10
Automatic
Disabled
Disabled
All drives are powered <ON>
Disabled
Disabled
Automatic speed, auto topology
All selected
No events
Partitioning is turned <OFF>
© 2014 Overland Storage, Inc. Page 92