Overland Storage NEO 200S User Manual page 84

NEO 200s/400s User Guide
Configure Library: Drives
This page allows you to modify the current ID assigned to a Fibre Channel drive.
This page allows any drive in the library to be powered off by de-selecting the check mark in
the Power On box. The displayed information will vary depending on the library model and
drive type (SAS or Fibre Channel).
This table lists all available elements on this page. An X indicates that the element displays
for the specified drive type.
Menu Item
Power On
Control Path
*
Port A
Speed
Topology
FC-AL Loop ID
* Port B Configuration is not used in this library.
Configure Library: Network
This page shows the current network configuration of the library and allows modification to
the configuration. When a change is requested, a pop-up box checks confirms the request.
10400367-001 04/2012
NEO 200s
NEO 400s
Description
For each drive, click in the box to power ON the selected drive.
The control path drive communicates messages from the host to
the library. Select this option for each drive that you want to be a
control path drive. At least one drive in each logical library must
be designated as a control path drive.
Configuration:
For each Fibre Channel drive, click the drop down list and select
Automatic, 1Gb/s, 2Gb/s, 4 Gb/s, or 8 Gb/s. Selecting Automatic
will allow library speed to automatically negotiate to the current
server speed.
For each Fibre Channel drive, click LN-Port, L-Port, or N-Port.
This is the loop position number if the drive is in an arbitrated
loop configuration.
©2012 Overland Storage, Inc.
Web User Interface Menus
Fibre SAS
X X
X X
X
X
X
5-20