NEO 8000e User Guide
The library reboots automatically to activate the reserved slots.
5. To view the change, go back to the Default screen and press Status.
Configuring a Fibre Channel Drive
In most cases, you can use the default configuration values for Fibre Channel drives.
However, if it becomes necessary to change the default values, these values are
editable:
• Port n Control
• Port n Loop ID
• World Wide Port n Name
• World Wide Node Name
• Topology
• Speed
• Directory Registration
Table 5-6
available. The information in this section shows you how to make those changes.
1. From the Default screen of the GUI, press Menu.
2. In the Edit Options area, press SCSI/FC.
NOTE: If a Service password is enabled, the validate password screen is displayed.
10400293-001 08/2010
Figure 3-10: Total Reserved Slots Confirmation Screen
in
Chapter 5, "Using the GUI Touchscreen,"
Enter the correct password and press Validate.
©2005-10 Overland Storage, Inc.
Installation and Initialization
details all the different settings
3-8