Sub Error Codes - Overland Storage NEO 200S User Manual

NEO 200s/400s User Guide
Error Code Description
F6 No drive installed. A drive has never
been installed.
F7 Support ticket download from drive not
possible.
F8 Invalid drive command
F9 Invalid drive parameter
FA SDCI microcode error
FB Drive logged out
FC Internal SCSI command failed with
check condition
FD Internal SCSI command timeout

Sub Error Codes

Error Code
00
01
02
03
04
05
06
07
08
09
0A
0B
0C
0D
0E
0F
10
11
12
13
14
20
10400367-001 04/2012
User Action
Refer to
Description
No sub error code
Mechanical initialization failure
Connection to slave robotic failed
Error motor initialization
Error during gripper close
Error slider home positioning
Error elevator home movement
Error during sled movement to rotation position
Error during rotation initialization, get range failed
Error elevator initialization
Error during rotation to far position
Error first sled initialization, move to sensor failed
Error during sled movement to rotation position
Error during rotation to drive position
Error slider initialization, get range failed
Error during slider forward movement
Error gripper initialization, get range failed
Error during slider home movement
Error during rotation to FAR position
Error sled initialization, move to sensor failed
Error during sled movement; check shipping lock
Error Inventory scan
©2012 Overland Storage, Inc.
"Isolating Drive Sled Problems" on page
ROBOTICS
Sub Error Codes
7-9.
8-6