Overland Storage NEO 200S User Manual page 129

NEO 200s/400s User Guide
Error Code
4E
50
51
52
53
54
55
56
57
60
61
62
63
64
65
70
71
72
73
80
81
82
90
91
92
93
94
95
A0
A1
A2
A3
A4
A5
A6
A7
B0
B1
10400367-001 04/2012
Description
Unexpected tape on elevator, possible inventory lost
Preposition to drive failed
Elevator movement to home sensor failed.
Sled movement to home sensor failed.
Error during sled movement to drive position.
Error during rotation to drive position.
Error during elevator movement in drive position.
Error during sled movement to rotation position.
Error during rotation to end position.
Move from/to drive failed.
Error during first slider movement.
Error during first gripper movement.
Error during second slider movement.
Error during second gripper movement, get range failed.
Error during third slider movement, move home failed.
Release magazine failed.
Error during sled movement to rotation position.
Error during rotation to unlock position.
Error during move sled to block.
Opening I/O slot failed.
Error during movement to I/O slot open position.
Error during moving back-sensor was found.
Movement to home position failed.
Elevator movement to home position failed.
Error during sled movement to rotation position.
Error during rotation to home or far position.
Sled movement to home sensor position failed.
Sled movement to transport position failed.
Movement of I/O slot failed.
Sled movement to sensor failed.
Sled movement to rotation position failed.
Elevator movement to home position failed.
Error during rotation to far position.
Sled movement to I/O slot position failed.
Error during elevator movement to position
Error during Mail Slot detection
EEPROM on robotics controller not accessible or error during Read/Write operation
Save/restore configuration settings: not enough internal memory available for creating
the file and restoring the file respectively
©2012 Overland Storage, Inc.
Sub Error Codes
8-8