Overland Storage NEO 200S User Manual page 143

NEO 200s/400s User Guide
• STE assignments:
• Logical Library 1 – Slot1 through 23 4096 (0x1000) through 4118 (0x1016)
Configuration of a Two-Partition System
A two-partition system must have a minimum of two drives, but may have three or four
drives. Partition 1 will contain any drives in drive position 1 and drive position 2. Partition
1 will also contain magazine 1 and magazine 2. Partition 2 will contain any drives in drive
position 3 and drive position 4. Partition 2 will also contain magazine 3 and magazine 4.
When configured with two logical partitions, the Element Address assignments will be as
follows:
• DTE assignments will be as shown in the figure below.
• STE assignments:
• Logical Library 1: Slot 1 through slot 21 4096 (x1000) through 4116 (0x1014)
• Logical Library 2: Slot 22 through slot 45 4096 (x1000) through 4019 (0x1017)
Configuration of a Three-Partition System
A three partition system must have at least three drives installed. A drive must be installed
in drive position 1, another drive must be installed in drive position 2, and another drive
must be installed in either drive position 3 or drive position 4. Partition 1 will contain the
first drive and the first magazine. Partition 2 will contain the second drive and the second
magazine. Partition 3 will contain any drives in drive position 3 and drive position 4.
Partition 3 will also contain magazine 3 and magazine 4.
• STE assignments:
• Logical Library 1: Slot 1 through slot 9 4096 (x1000) through 4104 (0x1008)
• Logical Library 2: Slot 10 through slot 21 4096 (x1000) through 4107 (0x100B)
• Logical Library 3: Slot 22 through slot 45 4096 (x1000) through 4119 (0x1017)
10400367-001 04/2012
2 Drives 3 Drives 4 Drives
Partition 1
©2012 Overland Storage, Inc.
Library Partitioning and Element Addressing
Partition 2
B-4